Satin Crystal Roll Up Display Media / 170 micron
- Polypropylene, grey lightstop backing
- 170 Micron
- Indoor Use
- Roll Widths: 914mm / 1370mm
- Finishes: Satin Crystal White
Features and benefits of Metamark MD-RU170
Metamark Digital Pop-Up has been developed for use with ‘Pop Up’ display systems, for use in exhibitions stands and for retail displays. The product’s 310 micron ‘ Light-stop’ polyester has a special top coating producing superb print quality and ensuring it lays flat without edge curling. MD-PU is scratch resistant and has an antistatic reverse side. Finish with matching MetaGuard 400 overlaminate. Fix MD-PU to the frame using self-adhesive magnetic strips.
How do I print and handle Metamark MD-PU?
Ensure that the material has reached room temperature and a relative humidity of 50% before printing.
Do not handle the face film directly and ensure it is free from dust and static.
Suitable for use on Solvent, Eco Solvent and Latex inkjet printers. Always perform a test print first.
Ensure that the correct profiles and heater settings are used. Most profiles are available for download from www.metamark.co.uk.
The product is designed to be used without overlaminating. It may also be overlaminated with MetaGuard 302.
Do not stack prints until fully cured. If a take up roller is used then a silicon liner may be interleaved to prevent blocking.
Allow the inks to cure before use, this is nominally 24-48 hours but dependant on the inks.
The durability of the finished print is dependent on the inks and printer.
What durability can I expect?
2 years indoor