Metamark logo

Next day delivery button

MetaGuard 300

MetaGuard 300

Intermediate PVC Overlaminate (Matched to MD3)

  • >70 Micron Matt or Gloss Calendered PVC
  • Permanent Clear Solvent Based Adhesive
  • 140gsm Layflat Kraft Liner
  • Abrasion Resistance: High
  • UV Protection: Medium
  • Chemical Protection: Low
  • Fire Rating - Class B. Refer to notes »
  • Suitable for Cold Lamination
  • Roll Widths: 760mm / 1370mm / 1520mm / 1600mm

Features and benefits of MetaGuard 300

MetaGuard 200 is a specially engineered Dry Wipe Overlaminate which can be easily applied over printed MD-Class Metamark digital media, such as MD3, to create dry wipe panels with permanent base graphics. The product is suitable for use with Dry Wipe marker pens, for indoor use only on flat panels. The clear coated film wipes clean with a dry cloth. Applications included menus and temporary information boards

How do I print and handle MetaGuard 300?

  • This product is suitable for cold lamination using a laminator
  • Ensure that the material has reached room temperature and a relative humidity of 50% before use
  • Allow the inks to cure before overlaminating, usually 24-48 hours. Failure to do so can cause delamination, tunnelling and shrinkage
  • Apply around 30C on the top roller to prevent silvering of the adhesive

What durability can I expect?

5 years

Download a Technical Data Sheet

 

Call 01948 662669 or email: This email address is being protected from spambots. You need JavaScript enabled to view it.

oki logo small       Roland logo     HP Inks     Summa    Rollover logo     Graphtec    Cadlink                        Keencut      Trimalco   Inglet Logo  Vivid  Secabo Logo