Metamark logo

Next day delivery button

MetaGuard Decor

MetaGuard Decor

DécorMark Textured PVC Overlaminates

  • 150 Micron Textured Vinyl
  • Permanent Clear Solvent Based Adhesive
  • 140gsm Layflat PE Kraft (Blue Print) Liner
  • Abrasion Resistance: High
  • UV Protection: Medium
  • Chemical Protection: Low
  • Suitable for Cold Lamination
  • Finishes: Artisan / SandTex / BrushStroke
  • Roll Widths: 760mm / 1370mm / 1520mm

Features and benefits of MetaGuard Decor

The MetaGuard Decor range of textured overlaminates provide a highly durable protection over Metamark Digital films. These wall covering films give peace of mind and scuff resistance in high traffic areas. The attractive textured finish hides many imperfections on the wall, and enhances depth of colour to the print. They 150 micron polymeric films offer excellent dimensional stability.

How do I print and handle MetaGuard Decor?

  • Ensure that the material has reached room temperature and a relative humidity of 50% before use. 

  • Suitable for use on Solvent, Eco Solvent inkjet and Latex prints on Metamark print media. Not suitable for UV prints.

  • Allow the inks to cure before overlaminating, usually 24-48 hours. Failure to do so can cause delamination, tunnelling and shrinkage.

  • Apply around 30C on the top roller to prevent silvering of the adhesive.

What durability can I expect?

7 years (This refers to the overlaminate and not the protection that it gives the printed image)

Download a Technical Data Sheet

 

Call 01948 662669 or email: This email address is being protected from spambots. You need JavaScript enabled to view it.

oki logo small       Roland logo     HP Inks     Summa    Rollover logo     Graphtec    Cadlink                        Keencut      Trimalco   Inglet Logo  Vivid  Secabo Logo