Contact button

Next day delivery button

Poli-Print 920

Technical DataPoli-print 920

Carrier: Monomeric PVC film, highly stabilized, calendered
Thickness: 100 µ (ISO 4593)
Adhesive: Grey Acrylic Dispersion, permanent
Adhesion: 6,5 N/cm (Finat FTM 1, after 24 hrs. on Stainless steel)
Dimensional stability: Shrinkage < 0,4 mm (Finat FTM 14)
Liner: One-sided clay-coated Silicone paper (135 g/m²)
Tensile strength md: > 20 MPa (DIN EN ISO 527)
Tensile strength cd: > 20 MPa (DIN EN ISO 527)
Elongation md: > 160 % (DIN EN ISO 527)
Elongation cd: > 180 % (DIN EN ISO 527)
Application temperature: > + 10 °C
Temperature durability: - 40 °C - +80 °C
Outdoor durability: 4 years (unprinted material, vertical outdoor exposure, central European normal climate)

General Information

  • Poli-Print 920 White Gloss PG is a Monomeric PVC-Film (white gloss, 100 µ)
  • Laminated with a one-sided clay-coated silicone paper (135 g/m²) and equipped with a grey dispersion acrylic adhesive (permanent)
  • Suitable for bonding various surfaces for example on commercial slabs, glass, metal or plastic
  • Especially suitable for the use on smooth as well as slightly curved surfaces
  • Poli-Print 920 White Gloss PG is ideal for short term presentation of advertising panels

What are the advantages of Poli-Print 920?

  • Very good opacity and flatness characteristics
  • Excellent dimensional stability
  • Fire classification B1 Certification and in accordance to DIN 4102-1 flame resistant adhered on steel surface
  • The film is resistant to the influence of solvent inks during the printing process and excellent printing results are guaranteed with all customary market ECO-Solvent, UV and Latex printers

How do I print and handle Poli-Print 920?

  • The print must be completely dry before laminating, a minimum of 48 hours drying time is recommended
  • The surface which is to be laminated should be free from any impurities to achieve optimal adhesion to the digital printed film

How do I transport & store Poli-Print 920?

  • 2 years if stored in original packaging at ca. 22° C and 50-55% relative humidity
  • Printed material should be completely dry and protected during transportation
  • Temperature and humidity fluctuations should be avoided

For more information or to place an order call 01948 662669 or email: This email address is being protected from spambots. You need JavaScript enabled to view it.

oki logo small       Roland logo     HP Inks     Summa    Rollover logo     Graphtec    Cadlink                        Keencut      Trimalco   Inglet Logo  Vivid  Secabo Logo